top of page

Kabel

Linn K400 Split 248

I use cables from my stock, which I originally bought second-hand in the hope that they would be of good quality.

The plugs are desoldered. Any remaining solder is then drilled out very carefully.

I sort out bad-sounding Knekt plugs with a small magnet. The bad ones have a shinier nickel coating and are magnetic.

Then all plugs are carefully reshaped to ensure a consistent, secure fit.

All plugs are then cleaned in an ultrasonic bath twice.

The plugs are then cleaned and degreased by hand.

The K400 is checked for oxidation (I have to throw away half of the K400 stock) and then cleaned with a rubber cleaning solution.

The fitting and soldering are carried out strictly according to Lejonklou’s recommendations, with forty years of soldering experience.

The assembly and sheathing are carried out with great care.

All contacts are cleaned after assembly with 100% alcohol.

Please plug and unplug the cables 2–3 times before listening, and allow them to burn in for a few days.

Anfertigung auf Anfrage

Preis: ****

Linn Silver Interconnect MKII CB RCA

I buy second-hand Linn Analogue Silver Interconnect cables from the first batch with closed ground ring RCA connectors.

These cables are often nearly 30 years old. I only use the original closed ground ring RCA connectors.

The RCA plugs I receive are all desoldered. Any remaining solder is then drilled out very carefully.

Then all RCA plugs are carefully reshaped to ensure a consistent, secure fit.

All plugs are then cleaned in an ultrasonic bath twice.

The plugs are then cleaned and degreased by hand.

For the cable material I use the new Linn Analogue Silver Interconnect MKII cable fresh from the reel.

The fitting and soldering are then carried out according to Lejonklou’s recommendations, with forty years of soldering experience.

The assembly and sheathing are carried out with great care.

All contacts are cleaned after assembly with 100% alcohol.

Please plug and unplug the cables 2–3 times before listening, and allow them to burn in for a few days.

Anfertigung auf Anfrage

Preis: ****

Produktfoto: ****

Anfertigung anfragen · +49 160 80 19 509

IMG_3484.jpg
IMG_3488.jpg
bottom of page